Sabtu, 08 Juni 2013

The Beauty of Friendship


What we experience for friends sometimes tiring and annoying, but that's what makes a beautiful friendship has value.

Friendship often presenting several trials, but true friendship can overcome the temptation to grow even with so ...

Friendship is not created automatically but requires a long process such as iron sharpens iron, so a friend sharpens his friend.

Friendship colored with a variety of experiences joy and sorrow, entertained - hurt, note - let down, heard - ignored, assisted - rejected, but all this was never done intentionally with the purpose of hatred.

A friend does not hide mistakes to avoid disputes, precisely because of his love he rebuked himself for what it is.

Companions never wrap blow with a kiss, but a very painful state what the purpose of his friends willing to change.

Process from a friend of a friend in need of maintenance effort loyalty, but not when we need help then we have the motivation to seek attention, help and statements from other people love, but instead he took the initiative to provide and realize what is required by his friend.

His desire is to be part of the life of his friend, because there is no friendship that begins with self-important attitude. Everyone will need true friends, but not everyone managed to get it. Many people who have enjoyed the beauty of friendship, but there are so devastated by his best friend betrayed.

Remember the last time you were in trouble. Who will be next to you?? Who do you love when you feel unloved?? Who wants to be with you when you can not give anything??

to BE your friend

Respect and nourish your friendship always.

LOVE


If we love someone, we will always pray for him even if he did not stand beside us.

God gave us two legs to walk, two hands to hold, two ears to hear and eyes to see two. But why did God only bestowed on our hearts piece? Because God has given a piece of liver to someone else for us to look. That's Love ...

Do not occasionally say goodbye if you still want to try. Do occasionally give up when you still feel up. Do not occasionally say you do not love him anymore, if you still can not forget it.

Love comes to those who still have hope, even though they have been let down. To those who still believe, even though they had been betrayed. To those who still want to love, even though they've been hurt before and To those who have the courage and conviction to rebuild the trust.

Do not store the words of love with people you care about so that he died because eventually kamuterpaksa please register the words of love that the tomb. Instead speak words of love tersimpandibenakmu it now while there he died.

Maybe God wants us to meet and have sex with the wrong people before meeting the right person, we should know how to thank you for the gift.

Love can turn bitter into sweet, turning dust gold, cloudy became clear, sick are healed, the prison into the lake, pain into pleasure, and anger into mercy.

It hurts to love someone who does not love you, but more painful adalahmencintai someone and you never had the courage to express your love to him.

Jumat, 07 Juni 2013

Folklore Sangkuriang - Legend of West Java



In antiquity, in West Java, lived a princess named Dayang Sumbi. He had a son named Sangkuriang. The child was very fond of hunting in the woods. Each hunting, he was always accompanied by her pet dog named Tumang. Tumang actually the incarnation of a god, and also Sangkuriang natural father, but Sangkuriang not know about it and she was deliberately kept it a secret.

One day, as usual Sangkuriang go into the woods to hunt. Once when he got in the woods, Sangkuriang start looking for prey. He saw there was a bird that was perched on a branch, then without thinking Sangkuriang shot, and right on target. Sangkuriang then ruled earlier Tumang to catch prey, but the Tumang silent and refused to follow orders Sangkuriang. Since it is very annoyed at Tumang, then Sangkuriang and drove Tumang and not allowed to go home with him again.

At home, Sangkuriang tell the incident to his mother. Upon hearing the story of her son, Dayang Sumbi very angry. He took a scoop of rice, and banged on the head Sangkuriang. Feeling disappointed with the treatment of his mother, then Sangkuriang decided to go wandering, and left his home.

After the incident, Dayang Sumbi deeply regretted his actions. He prays every day, and ask that one day could see her son again. Because of the seriousness of the Sumbi Dayang prayer, then God gave him a gift of eternal beauty and youth forever.

After many years Sangkuriang wandering, he eventually intends to return to his hometown. When I got there, she was very surprised at all, because his hometown has changed completely. Sangkuriang pleasure increases when the current in the middle of the road met a woman who is very beautiful girl, who is none other than Dayang Sumbi. Because fascinated by her beauty, the direct Sangkuriang proposed. Finally an application is received by Dayang Sumbi Sangkuriang, and agreed to be married in the near future. One day, his future wife Sangkuriang ask permission to hunt on Hatan. Before leaving, he asked Dayang Sumbi for belt tightening and smoothing kapalanya. Dayang Sumbi was surprised, because at the time she smoothed Sangkuriang headband, he saw a scar. The scars are similar to scar her. Once asked about the cause of the wound Sangkuriang, Dayang Sumbi tekejut increases, because it is true that her husband was her own son.

Dayang Sumbi very distraught, because he could not marry his own son. After Sangkuriang home hunting, Dayang Sumbi tried talking to Sangkuriang, so Sangkuriang cancel their wedding plans. Dayang Sumbi request is not approved Sangkuriang, and only considered the wind alone.

Dayang Sumbi every day thinking about how to order their wedding never happened. After thinking hard, Dayang Sumbi finally found the best way. He proposed two conditions to Sangkuriang. If Sangkuriang can fulfill both these requirements, then Dayang Sumbi would be his wife, but on the contrary if the marriage fails then it will be canceled. The first requirement Dayang Sumbi wants Citarum river dammed. And the second is, ask Sangkuriang to make a very large boat to cross the river. The second condition that must be resolved before dawn.

Sangkuriang Dayang Sumbi undertakes the second request, and promised to finish before dawn. With its magic, then Sangkuriang exert his friends from the jinn to help complete the task. Secretly, Dayang Sumbi peek of Sangkuriang work. How surprised he was, because Sangkuriang almost menyelesaiklan all requirements given Dayang Sumbi before dawn.

Dayang Sumbi then ask for help around the community to roll out a red silk cloth to the east of the city. When looking at the color flushed in the east of the city, Sangkuriang thought that it was late morning. Sangkuriang immediately stopped work and was not able to meet the requirements that have been proposed by Dayang Sumbi.

With a sense of annoyance and disappointment, then break down the dam Sangkuriang it has itself created. Because the dam collapse, then there was a flood and the whole town under water. Sangkuriang also kicked a big boat that has been made. Canoe was drifting and falling headlong, then became a mountain called Tangkuban Perahu.

Hopefully Sangkuriang Bermanfaan Folklore and Share This post is useful for you if, we say many thanks for your visit and Visit the set of Folklore others ...


DMCA Protection on: http://www.lokerseni.web.id/2012/01/cerita-rakyat-sangkuriang.html#ixzz2VbXgyG00

The Dangerous Notion That Debt Doesn’t Matter

With little fanfare, a dangerous notion has taken hold in progressive policy circles: that the amount of money borrowed by the federal government from Americans to finance its mammoth deficits doesn’t matter.
Debt doesn’t matter? Really? That’s the most irresponsible fiscal notion since the tax-cutting mania brought on by the advent of 
supply-side economics. And it’s particularly problematic right now, as Congress resumes debating whether to extend the payroll-tax reduction or enact other stimulative measures.
Here’s the theory, in its most extreme configuration: To the extent that the government sells its debt to Americans (as opposed to foreigners), those obligations will disappear as aging folks who buy those Treasuries die off.
If that doesn’t seem to make much sense, don’t be puzzled — it doesn’t. Government borrowing is still debt that must eventually be paid off, just as we were taught in introductory economics.
Failing to repay the debt would mean not only the ugliness of default but also depriving the next generation of whatever savings their parents parked in government bonds.
And remember that just a small fraction of Treasuries are owned by individual Americans. Institutions and many foreign entities own the rest and are not about to give up claims that they are owed.
The more realistic alternative of continuing to service that debt offers the unattractive eventual prospect of either higher taxesor sharp cutbacks in government programs, or both.
That problem is greatly compounded by the fact that the $10 trillion of debt that is held by investors represents only a fraction of the federal government’s obligations and ignores an additional $46 trillion of commitments to 
Social Security and Medicare.
Of course every modern economy both tolerates and benefits from some amount of debt. But the United States has been on a binge, brought on by a toxic mix of spending increases and tax cuts that began with the Reagan tax cuts in the 1980s and were later turbocharged by those of President George W. Bush.
The figures are stark. In 1975, government debt per household was roughly equal to half of a typical household’s annual income. Today, it’s 1.7 times. Add entitlements, and the obligations would take a mind-boggling nine years of family income to pay off.
Even deficit hawks like me recognize that with the economy still barely above stall speed, now is hardly the moment for the government to slam on the fiscal brakes, debt or no debt.
So that means there’s no realistic alternative to more debt. But we can reduce the adverse consequences by how we spend this borrowed money. There are two main forms of stimulus: one kind is channeled through tax cuts and then mostly spent, just like a strapped family that puts its monthly expenses onto a credit card. Alternatively, government can direct its resources toward long-term investments that earn a return; think roads and dams but also medical research and education.
At the moment, gridlock grips Washington, and about all that Congress has offered is a two-month cut in the 
payroll tax, which may help shake the economy out of the doldrums but provides little lasting benefit.
We could just as effectively throw borrowed hundred-dollar bills out of airplanes. About the only worse approach would be nothing at all.
Government’s focus should shift toward investment. To do so, multiple challenges must be overcome.
First, unlike every company in America, the government doesn’t keep its books in a way that highlights these important two categories, investment and consumption. As a result, Congress can’t evaluate the long-term impact of its actions.
Second, the dark shadow of the 
Tea Party movement has made added spending — the route for most new government investment — taboo.
While public investment may take longer to unleash its positive forces, the case for it is compelling, in part because rising entitlement expenditures have crowded out government’s investment activities.
In the early 1950s, government devoted about 1.2 percent of gross domestic product to infrastructure; by 2010, that amount had fallen to just 0.2 percent. Meanwhile, federal spending on research and development dropped from a high of nearly 2 percent in 1964 to 0.9 percent in 2009.
By contrast, Franklin D. Roosevelt’s much-praised Works Progress Administration spent the equivalent of at least $1.5 trillion over eight years on projects that in New York City alone ranged from building La Guardia Airport to reroofing the New York Public Library to creating a lasting body of literary and artistic work.
I agree that short-term help for the economy combined with long-term deficit reduction is the right direction for budgetary policy.
But we also need to make every dollar of debt matter, and therefore we should be directing our efforts to lifting the economy toward programs that provide long-term benefit, not just a short-term burst of caffeinated energy.
·         and the obligations would take a mind-boggling nine years of family income to pay off. (preference)
·         But we can reduce the adverse consequences by how we spend this borrowed money.
(ability/possibility)
·         government can direct its resources toward long-term investments that earn a return
(ability/possibility)
·         which may help shake the economy out of the doldrums but provides little lasting benefit. (less than 50% certainty)
·         About the only worse approach would be nothing at all.(preference)
·         Government’s focus should shift toward investment. To do so, multiple challenges must be overcome.(advisability)

Resource :
http://ryuku-perubahan.blogspot.com/2012/04/tugas-binggris-bisnis2-ke-2.html

Conclusion :
short-term help for the economy combined with long-term deficit reduction is the right direction for budgetary policy. 
But we also need to make every dollar of debt matter, and therefore we should be directing our efforts to lifting the economy toward programs that provide long-term benefit, not just a short-term burst of caffeinated energy

The Economics of Happiness

We live in a time of high anxiety. Despite the world’s unprecedented total wealth, there is vast insecurity, unrest, and dissatisfaction. In the United States, a large majority of Americans believe that the country is “on the wrong track.” Pessimism has soared. The same is true in many other places.
Against this backdrop, the time has come to reconsider the basic sources of happiness in our economic life. The relentless pursuit of higher income is leading to unprecedented inequality and anxiety, rather than to greater happiness and life satisfaction. Economic progress is important and can greatly improve the quality of life, but only if it is pursued in line with other goals.
In this respect, the Himalayan Kingdom of Bhutan has been leading the way. Forty years ago, Bhutan’s fourth king, young and newly installed, made a remarkable choice: Bhutan should pursue “gross national happiness” rather than gross national product. Since then, the country has been experimenting with an alternative, holistic approach to development that emphasizes not only economic growth, but also culture, mental health, compassion, and community.
Dozens of experts recently gathered in Bhutan’s capital, Thimphu, to take stock of the country’s record. I was co-host with Bhutan’s prime minister, Jigme Thinley, a leader in sustainable development and a great champion of the concept of “GNH.” We assembled in the wake of a declaration in July by the United Nations General Assembly calling on countries to examine how national policies can promote happiness in their societies.
All who gathered in Thimphu agreed on the importance of pursuing happiness rather than pursuing national income. The question we examined is how to achieve happiness in a world that is characterized by rapid urbanization, mass media, global capitalism, and environmental degradation. How can our economic life be re-ordered to recreate a sense of community, trust, and environmental sustainability?
Here are some of the initial conclusions. First, we should not denigrate the value of economic progress. When people are hungry, deprived of basic needs such as clean water, health care, and education, and without meaningful employment, they suffer. Economic development that alleviates poverty is a vital step in boosting happiness.
Second, relentless pursuit of GNP to the exclusion of other goals is also no path to happiness. In the US, GNP has risen sharply in the past 40 years, but happiness has not. Instead, single-minded pursuit of GNP has led to great inequalities of wealth and power, fueled the growth of a vast underclass, trapped millions of children in poverty, and caused serious environmental degradation.
Third, happiness is achieved through a balanced approach to life by both individuals and societies. As individuals, we are unhappy if we are denied our basic material needs, but we are also unhappy if the pursuit of higher incomes replaces our focus on family, friends, community, compassion, and maintaining internal balance. As a society, it is one thing to organize economic policies to keep living standards on the rise, but quite another to subordinate all of society’s values to the pursuit of profit.
Yet politics in the US has increasingly allowed corporate profits to dominate all other aspirations: fairness, justice, trust, physical and mental health, and environmental sustainability. Corporate campaign contributions increasingly undermine the democratic process, with the blessing of the US Supreme Court.
Fourth, global capitalism presents many direct threats to happiness. It is destroying the natural environment through climate change and other kinds of pollution, while a relentless stream of oil-industry propaganda keeps many people ignorant of this. It is weakening social trust and mental stability, with the prevalence of clinical depression apparently on the rise. The mass media have become outlets for corporate “messaging,” much of it overtly anti-scientific, and Americans suffer from an increasing range of consumer addictions.
Consider how the fast-food industry uses oils, fats, sugar, and other addictive ingredients to create unhealthy dependency on foods that contribute to obesity. One-third of all Americans are now obese. The rest of the world will eventually follow unless countries restrict dangerous corporate practices, including advertising unhealthy and addictive foods to young children.
The problem is not just foods. Mass advertising is contributing to many other consumer addictions that imply large public-health costs, including excessive TV watching, gambling, drug use, cigarette smoking, and alcoholism.
Fifth, to promote happiness, we must identify the many factors other than GNP that can raise or lower society’s well-being. Most countries invest to measure GNP, but spend little to identify the sources of poor health (like fast foods and excessive TV watching), declining social trust, and environmental degradation. Once we understand these factors, we can act. 
The mad pursuit of corporate profits is threatening us all. To be sure, we should support economic growth and development, but only in a broader context: one that promotes environmental sustainability and the values of compassion and honesty that are required for social trust. The search for happiness should not be confined to the beautiful mountain kingdom of Bhutan.
http://www.project-syndicate.org/commentary/sachs181/English
1.  holistic approach to development that emphasizes not only economic growth, but also culture, mental health, compassion, and community : pendekatan holistik pembangunan yang menekankan tidak hanya pertumbuhan ekonomi, tetapi juga budaya, kesehatan, mental kasih sayang, dan masyarakat
2.  happiness is achieved through a balanced approach to life by both individuals and societies : kebahagiaan dicapai melalui pendekatan yang seimbang untuk kehidupan oleh individu dan masyarakat



Neither Revolution Nor Reform: A New Strategy for the Left


For over a century, liberals and radicals have seen the possibility of change in capitalist systems from one of two perspectives: the reform tradition assumes that corporate institutions remain central to the system but believes that regulatory policies can contain, modify, and control corporations and their political allies. The revolutionary tradition assumes that change can come about only if corporate institutions are eliminated or transcended during an acute crisis, usually but not always by violence.
But what happens if a system neither reforms nor collapses in crisis?
Quietly, a different kind of progressive change is emerging, one that involves a transformation in institutional structures and power, a process one could call “evolutionary reconstruction.” At the height of the financial crisis in early 2009, some kind of nationalization of the banks seemed possible. “The public hates bankers right now,” the Brookings Institution’s Douglas Elliot observed. “Truthfully, you would find considerable support for hanging a number of bankers…” It was a moment, Barack Obama told banking CEOs, when his administration was “the only thing between you and the pitchforks.” But the president opted for a soft bailout engineered by Treasury Secretary Timothy Geithner and White House economic adviser Lawrence Summers. Whereas Franklin Roosevelt attacked the “economic royalists” and built and mobilized his political base, Obama entered office with an already organized base and largely ignored it.
When the next financial crisis occurs, and it will, a different political opportunity may be possible. One option has already been put on the table: in 2010, thirty-three senators voted to break up large Wall Street investment banks that were “too big to fail.” Such a policy would not only reduce financial vulnerability; it would alter the structure of institutional power.
Still, breaking up banks, even if successful, isn’t the end of the process. The modern history of the financial industry, to say nothing of anti-trust strategies in general, suggests that the big banks would ultimately regroup and reconcentrate and restore their domination of the system. So what can be done when “breaking them up” fails?
The potentially explosive power of public anger at financial institutions surfaced in May 2010 when the Senate voted by a 96-0 margin to audit the Federal Reserve’s lending (a provision included ultimately in the Dodd-Frank legislation, which was designed to protect American taxpayers and consumers from financial corruption and to make the financial system more accountable)—something that had never been done before. Traditional reforms have aimed at improved regulation, higher reserve requirements, and the channeling of credit to key sectors. But future crises may feature a spectrum of sophisticated proposals for more radical change offered by figures on both the left and right. For instance, a “Limited Purpose Banking” strategy put forward by conservative economist Laurence Kolticoff would impose a 100-percent reserve requirement on banks. Because banks typically provide loans in amounts many times their reserves, this would transform them into modest institutions with little or no capacity to finance speculation. It would also nationalize the creation of all new money as federal authorities, rather than the banks, would directly control system-wide financial flows. A variety of respected liberal as well as conservative economists have welcomed this strategy—including five Nobel laureates in economics.
On the left, the economist Fred Moseley has proposed that for banks deemed too big to fail “permanent nationalization with bonds-to-stocks swaps for bondholders is the most equitable solution…” Nationally owned banks, he argues, would provide a basis for “a more stable and public-oriented banking system in the future.” Most striking is the argument of Willem Buiter, the chief economist of Citigroup no less, that if the public underwrites the costs of bailouts, “banks should be in public ownership…” In fact, had the taxpayer funds used to bail out major financial institutions in 2007–2010 been provided on condition that voting stock be issued in return for the investment, one or more major banks would, in fact, have become essentially publicly controlled banks.
Unknown to most Americans, there have been a large number of small and medium-sized public banking institutions for some time now. They have financed small businesses, renewable energy, co-ops, housing, infrastructure, and other specifically targeted areas. There are also 7,500 community-based credit unions. Further precedents for public banking range from Small Business Administration loans to the activities of the U.S.-dominated World Bank. In fact, the federal government already operates 140 banks and quasi-banks that provide loans and loan guarantees for an extraordinary range of domestic and international economic activities. Through its various farm, housing, electricity, cooperative and other loans, the Department of Agriculture alone operates the equivalent of the seventh largest bank in America.
The economic crisis has also produced widespread interest in the Bank of North Dakota, a highly successful state-owned bank founded in 1919 when the state was governed by legislators belonging to the left-populist Nonpartisan League. Over the past fourteen years, the bank has returned $340 million in profits to the state and has broad support in the business community as well as among progressive activists. Legislative proposals to establish banks patterned in whole or in part on the North Dakota model have been put forward by activists and legislators in Washington, Oregon, California, Arizona, New Mexico, Montana, Illinois, Louisiana, New York, Maryland, Virginia, Maine, and Massachusetts. In Oregon, with strong support from a coalition of farmers, small-business owners, and community bankers, and backed by State Treasurer Ted Wheeler, a variation on the theme, “a virtual state bank” (that is, one that has no storefronts but channels state-backed capital to support other banks) is likely to be formed in the near future. How far the various strategies may develop is likely to depend on the intensity of future financial crises, the degree of social and economic pain and political anger in general, and the capacity of a new politics to focus citizen anger in support of major institutional reconstruction and democratization.
That a long era of social and economic austerity and failing reform might paradoxically open the way to more populist or radical institutional change—including various forms of public ownership—is also suggested by emerging developments in health care. Here the next stage of change is already under way. At first, it is likely to be harmful. Republican efforts to cut back the mostly unrealized benefits of the Affordable Care Act, passed in 2010, provide one example of this. The first stages, however, are not likely to be the last. Polls show overwhelming distrust of and deep hostility toward insurance companies. We can also expect public outrage to be fueled by stories like that of fifty-nine-year-old James Verone who attempted to rob a bank in Gastonia, North Carolina this year—but only, he made clear, for one dollar. The reason: unemployed and without health insurance, Verone simply saw no way other than going to jail to get health care for a growth on his chest, foot difficulties, and back problems.
Cost pressures are building in ways that will also continue to undermine corporations facing global competitors, forcing them to seek new solutions. A recent report from the federal Centers for Medicare and Medicaid Services (“National Health Expenditure Projections, 2009–2019”) projects health care costs to rise from the 2010 level of 17.5 percent of GDP to 19.6 percent in 2019. It has long been clear that the central question is to what extent, and at what pace, underlying cost pressures ultimately force development of some form of single-payer system—the only serious way to deal with the underlying problem.
A NEW national solution is ultimately likely to come either in response to a burst of pain-driven public outrage or more slowly through a state by state build up to a national system. Massachusetts, of course, already has a near universal plan, with 99.8 percent of children covered and 98.1 percent of adults. In Hawaii, health coverage (provided mostly by nonprofit insurers) reaches 91.8 percent of adults in large part because of a 1970s law mandating low cost insurance for anyone working twenty hours or more a week. In Vermont, Governor Peter Shumlin signed legislation in May 2011 creating “Green Mountain Care,” a broad effort that would ultimately allow state residents to move into a publicly funded insurance pool—in essence a form of single-payer insurance. Universal coverage, dependent on a federal waiver, would begin in 2017 and possibly as early as 2014. In Connecticut, legislation approved in June 2011 created a “SustiNet” Health Care Cabinet directed to produce a business plan for a nonprofit public health insurance program by 2012, with the goal of offering such a plan beginning in 2014. In California, there is a good chance a universal “Medicare for all” bill may be on the governor’s desk for signature by mid-2012. (Similar legislation passed by both the House and the Senate was vetoed by then-Governor Schwarzenegger in 2006 and 2008.) In all, nearly twenty states will soon consider bills to create one or another form of universal health care.
One can also observe a developing institutional dynamic in the central neighborhoods of some of the nation’s larger cities, places that have consistently suffered high levels of unemployment and underemployment, with poverty commonly above 25 percent. In such neighborhoods, democratizing development has also gone forward, again paradoxically, precisely because traditional policies—in this case involving large expenditures for jobs, housing and other necessities—have been politically impossible. “Social enterprises” that undertake businesses in order to support specific social missions now increasingly make up what is sometimes called “a fourth sector” (different from the government, business, and nonprofit sectors). Roughly 4,500 not-for-profit community development corporations are largely devoted to housing development. There are now also more than eleven thousand businesses owned in whole or part by their employees; five million more individuals are involved in these enterprises than are members of private-sector unions. Another 130 million Americans are members of various urban, agricultural, and credit union cooperatives. In many cities, important new “land trust” developments are underway using an institutional form of nonprofit or municipal ownership that develops and maintains low- and moderate-income housing.
The various institutional efforts have also begun to develop innovative strategies that suggest broader possibilities for change. Consider the Evergreen Cooperatives in Cleveland, Ohio, an integrated group of worker-owned companies, supported in part by the purchasing power of large hospitals and universities. The cooperatives include a solar installation company, an industrial scale (and ecologically advanced) laundry, and soon a greenhouse capable of producing more than five million heads of lettuce a year. The Cleveland effort, which is partly modeled on the nearly 100,000 person Mondragón cooperatives in the Basque region of Spain, is on track to create new businesses, year by year, as time goes on. However, its goal is not simply worker ownership, but the democratization of wealth and community-building in general in the low-income Greater University Circle area of what was once a thriving industrial city. Linked by a nonprofit corporation and a revolving fund, the companies cannot be sold outside the network; they also return 10 percent of profits to help develop additional worker-owned firms in the area. (Full disclosure: The Democracy Collaborative, which I co-founded, has played an important role in helping develop the Cleveland effort. See www.Community-Wealth.org for further information on this and many other local and state efforts.)
Another innovative enterprise is Market Creek Plaza in San Diego. There a comprehensive, community-owned project links individual and collective wealth-building through a $23.5-million commercial and cultural complex anchored by a shopping center. The complex has developed a range of social and economic projects that have resulted in the employment of more than 1,700 people. Its multicultural emphasis on the arts has helped create several venues for common activity among the local Asian, Hispanic, and black communities.
Significantly, these collectively owned businesses are commonly supported by unusual local alliances, including not only progressives; labor unions; and nonprofit and religious leaders; but also, in many cases, the backing of local businesses and bankers. The efforts have also attracted surprising political support. In Indiana, for example, Republican State Treasurer Richard Mourdock has established a state linked deposit program to provide state financing support for employee ownership. At this writing, Ohio Democratic Senator Sherrod Brown has plans to introduce model legislation to support the development of an initial group of Evergreen-style efforts in diverse parts of the country. Environmental concerns are also involved; many of the enterprises are “green” by design, increasingly so as time goes on. Cleveland’s Evergreen laundry, which uses less than a third the amount of water used by comparable commercial firms, is one of the most ecologically advanced in the Midwest. In Washington state, Coastal Community Action (CCA) operates a portfolio of housing, food, health, and employment programs for low-income residents that uses development and ownership of a fourteen million dollar wind turbine to generate income to support its social service programs.
Yet another sphere of institutional growth centers on land development. By maintaining direct ownership of areas surrounding transit station exits, public agencies in Washington, D.C., Atlanta, and other cities earn millions capturing the increased land values their transit investments create. The town of Riverview, Michigan, has been a national leader in trapping methane from its landfills and using it to fuel electricity generation, thereby providing both revenues and jobs. There are roughly five hundred similar projects nationwide. Many cities have established municipally owned hotels. There are also over two thousand publicly owned utilities that provide power (and, increasingly, broadband services) to more than forty-five million Americans, in the process generating $50 billion in annual revenue. Significant public institutions are also common at the state level. CalPERS, California’s public pension authority, helps finance local community development needs; in Alaska, state oil revenues provide each citizen with dividends from public investment strategies as a matter of right; in Alabama, public pension investing has long focused on state economic development (including employee-owned firms).
ALTHOUGH PUBLIC ownership is surprisingly widespread, it can also be vulnerable to challenge. The fiscal crisis, and conservative resistance to raising taxes, has led some mayors and governors to sell off public assets. In Indiana, Governor Mitch Daniels sold the Indiana Toll Road to Spanish and Australian investors. In Chicago, then-Mayor Richard Daley privatized parking meters and toll collection on the Chicago Skyway and even proposed selling off recycling collection, equipment maintenance, and the annual “Taste of Chicago” festival. How far continuing financial and political pressures may lead other officials to attempt to secure revenues by selling off public assets is an open question. Public resistance to such strategies, although less widely publicized, has been surprisingly strong in many areas. Toll road sales have been held up in Pennsylvania and New Jersey, and newly elected Chicago Mayor Rahm Emanuel recently voiced his opposition to an attempt to privatize Midway Airport as previously attempted by Daley. An effort to transfer city-owned parking garages to private ownership in Los Angeles also failed when residents and business leaders realized parking rates would spike if the deal went through.
One thing is certain: traditional liberalism, dependent on expensive federal policies and strong labor unions, is moribund. The government no longer has much capacity to use progressive taxation to achieve the goal of equity or to regulate corporations effectively. Congressional deadlocks on such matters are the rule, not the exception. At the same time, ongoing economic stagnation or mild upturns followed by further decay, and “real” unemployment rates in the 15 percent to 16 percent range appear more likely than a return to booming economic times.
IRONICALLY, THIS grim new order may open the way for the kinds of “evolutionary reconstructive” institutional change described here. Since the Great Depression, liberal activists and policy makers have implicitly assumed they were providing one or another form of “countervailing power” against large corporations. But institutional reconstruction aims either to weaken or displace corporate power. Strategies like anti-trust or efforts to “break up” big banks aim to weaken. Public banking, municipal utilities, and single-payer health plans attempt to displace privately owned companies. At the same time, community-based enterprises offer public officials alternatives to paying large tax-incentive bribes to big corporations.
Of course, “evolutionary reconstruction” might fail, as have most kinds of top-down national reform. The era of stalemate and decay might continue and worsen. Like ancient Rome, the United States could simply decline and fall, unable to address its social ills.
However, even during a sustained era of stalemate and decay, it may be possible to develop a coherent long-term progressive strategic direction. Such a direction would build upon the remaining energies of traditional liberal reform, animated over time by new populist anger and movements aimed at confronting corporate power, the extreme concentration of income, failing public services, the ecological crisis, and military adventurism. And it would explicitly advocate the construction of new institutions run by people committed to developing an expansively democratic polity, thereby giving political voice to the new constituencies emerging alongside the new developments at the same time it helps to begin altering underlying institutional power balances.
In connection with environmental issues, at least, some “capitalists” also seem willing to sign onto this vision. New organizations like the Business Alliance for Local Living Economies (BALLE) and the American Sustainable Business Council (ASBC) have been quietly developing momentum in recent years. BALLE, which has more than 22,000 small business members, works to promote sustainable local community development. ASBC (which includes BALLE as a member) is an advocacy and lobbying effort that involves more than 150,000 business professionals and 30 separate business organizations committed to sustainability. Leading White House figures and such Cabinet-level officials as Labor Secretary Hilda Solis have welcomed the organization as a counter to the national Chamber of Commerce. (Jeffrey Hollender, chair of ASBC’s Business Leadership Council and former CEO of Seventh Generation, has denounced the Chamber for “fighting democracy and destroying America’s economic future” because of its opposition to climate change legislation and its support for the Citizens United decision.) Gus Speth, a member of ASBC’s Advisory Board (and former environmental adviser to Presidents Carter and Clinton) offers a more far-reaching general perspective: “For the most part, we have worked within this current system of political economy, but working within the system will not succeed in the end when what is needed is transformative change in the system itself.”
AT THE heart of the spectrum of emerging institutional change is the traditional radical principle that the ownership of capital should be subject to democratic control. In a nation where 1 percent of the population owns nearly as much wealth as the entire bottom half of the nation, this principle may be particularly appealing to the young—the people who will shape the next political era. In 2009, even as Republicans assailed President Obama and his liberal allies as immoral “socialists,” a Rasmussen poll reported that Americans under thirty were “essentially evenly divided” as to whether they preferred “capitalism” or “socialism.” Even if many were unsure about what “socialism” is, they were clearly open to something new, whatever it might be called. A non-statist, community-building, institution-changing, democratizing strategy might well capture their imagination and channel their desire to heal the world. It is surely a positive direction to pursue. Just possibly, it could open the way to an era of true progressive renewal, even one day perhaps step-by-step systemic change or the kind of unexpected, explosive, movement-building power evidenced in the “Arab Spring” and, historically, in our own civil rights, feminist, and other great movements.
http://www.neweconomyworkinggroup.org/article/neither-revolution-nor-reform-new-strategy-left
1. But what happens if a system neither reforms nor collapses in crisis? : Tapi apa yang terjadi jika sistem tidak reformasi atau runtuh dalam krisis?
2.  A NEW national solution is ultimately likely to come either in response to a burst of pain-driven public outrage or more slowly through a state by state build up to a national system : Sebuah solusi nasional BARU pada akhirnya akan datang baik dalam menanggapi ledakan sakit berbasis kemarahan publik atau lebih lambat melalui sebuah negara oleh negara membangun hingga sistem nasional

Curly Hair Care Tips




Curly hair have different types. Big curly hair, curly frizzy curls up like a sausage that is very circular. Because various types of this, curly hair has a lot of problems because every person has a curly pattern that is different.

According YouBeauty, experts do not know clearly why there are many types of hair. Curly hair care tips too different. But definitely, the shape of your hair follicle curly-haired, has a bag of curly hair and also hair protein (keratin) that exist in the base of the hair will affect your hair type. All hair types will grow twisted, whatever your hair type. Will get curly hair if its wave number is growing.

Curly hair care tips

Keep the humidity
The owners of curly hair is highly recommended to maintain the hair moisture. In order for curly hair more smooth and gentle to use a deep conditioning treatment twice a month. If your hair is dry, do not wash too often, try to only twice a week.

Be careful Drying
You must be careful to handle curly hair. Avoid using too coarse towel when drying your hair or wrap your hair with a towel to absorb the excess water wash.

"Curly hair must be dried slowly, but if your schedule is too dense for it, wipe with a soft towel and make sure your hair does not fall apart when rubbed," advises celebrity stylist Kristan Serafino. "If curly hair is touched with the rough - or worse combed - will cause your natural curly hair matted instead."

Citing Conectique, you should dry the hair with your fingers, with or without a fan. The result will make the hair become more organized and flexible.

Do not touch
When using curl enhancer products like cream, gel or mousse, follow the pattern of your hair curly, rotate from the middle to the ends of your hair, advice Serafino. "When hair is dry, then you should apply new silicone serum on the ends of your hair to soften curly pattern and make it more shiny," he added.

Once laid out, do not touch your hair again because the more you play, your hair will actually grow tangled. Thus curly hair care tips, may be useful for you.

conclusion :
Also called hair curly hair afro. Character of this hair is dry and rough, that's why this type of hair brittle and damaged cederung. Kndisi order to keep strands of curly hair becomes more smooth and elastic, thorough scalp massage using a conditioner before keramasuntuk sebaceus glands stimulate production. Use hair conditioner is also rich moisturizing formula. To avoid the problem tangles, use a coral-toothed comb or use a natural bristle brush that hair strands to relax. With proper care and handling, curly hairstyles can make a person look more sexy da eksoits. But many feel has always had a bad hair day when the curly hair types. Here is a solution to cope with a bad hair day for those who have curly hair models:
Do not be too frequent hair combing.
Better to use the hand that has been given a smoothing serum for the hair comb.
Use our fingers to twist the hair into small sections that tight little curls, then pull the curls a little every so hang in loose coils

if it will blow, wait 15 minutes before using a hair dryer to dry the hair coils. It can heat up without pulling hair cuticle and makes hair rough.

Source :

Computer

A computer is a programmable machine that receives input, stores and manipulates data//information, and provides output in a useful format.

While a computer can, in theory, be made out of almost anything (see misconceptions section), and mechanical examples of computers have existed through much of recorded human history, the first electronic computers were developed in the mid-20th century (1940–1945). Originally, they were the size of a large room, consuming as much power as several hundred modern personal computers (PCs). Modern computers based on integrated circuits are millions to billions of times more capable than the early machines, and occupy a fraction of the space. Simple computers are small enough to fit into mobile devices, and can be powered by a small battery. Personal computers in their various forms are icons of the Information Age and are what most people think of as "computers". However, the embedded computers found in many devices from MP3 playersto fighter aircraft and from toys to industrial robots are the most numerous.


conclusion
today everyone is familiar with computers this is caused by the rapid development era. So that computers become a necessity to finish the job. Computers are also used as entertainment like: to play gime.


http://en.wikipedia.org/wiki/Computer

WOOD COMPOSITE POWDER PLASTIC RECYCLING TECHNOLOGY USE ALTERNATIVE WASTE WOOD AND PLASTIC

Due to the unique nature and characteristics, wood is the material most widely used for construction purposes. The ever-increasing demand for wood and forest potential of dwindling demand the use of wood in an efficient and expedient, by utilizing such waste sawdust into useful products. On the other hand, along with the development of technology, the need for plastics continue to increase as a consequence, increased waste plastikpun inevitable. Waste plastic is a material that can not be decomposed by microorganisms decomposing (non-biodegradable), so penumpukkannya in nature feared to cause environmental problems.
Technological developments, particularly in the field of composite board, has produced a composite product which is a combination of sawdust with recycled plastic. The technology was developed in the early 1990s in Japan and the United States. With this technology it is possible utilization of sawdust and recycled plastic to the maximum, thus will reduce the amount of waste generated. In Indonesia, research on these products is limited, whereas raw material waste potential is enormous.
This paper will present a brief overview of the potential and utilization of wood waste, particularly sawdust, and plastic waste as a product of wood-plastic composite powder recycling.
POTENTIAL AND UTILIZATION OF WASTE WOOD POWDER 

Human need for wood as building material for the purposes of construction, decoration, and furniture continues to increase along with the increase in population. Timber demand for the timber industry in Indonesia is estimated at 70 million m3 per year with an average of 14.2% per year while roundwood production estimated at 25 million m3 per year, so there was a deficit of 45 million m3 (Priyono, 2001). This suggests that the actual carrying capacity of the forest has been unable to meet the demand for wood. This situation is exacerbated by the presence komversi natural forests into agricultural land, shifting cultivation, forest fires, harvesting practices are not efisen and infrastructure development, followed by forest encroachment. These conditions require the use of wood in an efficient and prudent, among others, through the concept of the whole tree utilization, while increasing the use of non-wood berlignoselulosa, and the development of innovative products as a substitute for wood building materials.
Regrettably, to date harvesting and processing of timber in Indonesia still produces large amounts of waste. Purwanto et al, (1994) stated the composition of waste in harvesting and wood processing industry are as follows:
1. On timber harvesting, waste generally shaped logs, reaching 66.16%
2. In industrial sawmill wood waste sawdust covering 10.6 &. Sebetan 25.9% and 14.3% cuts, a total waste 50.8% of the total raw material digubakan
3. Industrial waste at the waste pieces of plywood covering 5.6%, 0.7% sawdust, 24.8% wet veneer waste, dry waste veneer peeling the remaining 12.6% 11.0% and a piece of plywood edges 6.3% . Total waste plywood for 61.0% of total raw materials used.
Data from the Ministry of Forestry and Plantations in 1999/2000 showed that Indonesia’s plywood production reached 4.61 million m3 of sawn timber while achieving 2.06 million m3. Assuming the waste generated is estimated to reach 61% of the wood waste generated reached more than 5 million m3 (CBS, 2000).
Wood waste in the form of pieces of logs and sebetan been used as the core block board and particle board material. The waste floured kergaji utilization is still not optimal. For large, integrated industrial, waste sawdust sawn been utilized as a form of charcoal briquettes and activated charcoal are sold commercially. But for the sawmilling industry small-scale industries, which accounted for thousands of units and the countryside, the waste has not been used optimally. An example is the industrial mills in Jambi, amounting to 150 pieces of which are located on the edge of the river Batang, sawn wood waste generated is dumped into the river, causing siltation and reduction process stream segment (Pari, 2002). In most of the wood processing industry waste sawdust are commonly used as furnace fuel, or burned away without meaningful use, which can cause environmental pollution (Febrianto, 1999). In order to efficient use of wood are needed to use sawdust into a more useful product.
FROM PLASTIC TO PLASTIC WASTE RECYCLING 

Plastic name representing thousands of different physical properties of materials, mechanical, and chemical. Broadly speaking, the plastic can be classified into two major categories, namely plastics are thermoplastic and thermoset that is. Thermoplastic can be reshaped easily and processed into other forms, whereas when it has hardened types of thermosets can not be softened again. The most common plastic used in everyday life in the form of thermoplastic.
Along with the development of technology, the need for plastic continues to increase. BPS data in 1999 showed that the volume of trade of Indonesia’s imports of plastic, especially polypropylene (PP) in 1995 amounted to 136,122.7 tons, while in 1999 amounted to 182,523.6 tons, so that in this period there was an increase of 34.15%. The number is expected to continue to increase in subsequent years. As a consequence, an increase in waste plastikpun inevitable. According to Hartono (1998) the composition of the waste or plastic waste dumped by each household was 9.3% of total household waste. In Jabotabek average each plant produces one ton of plastic waste every week. That number will continue to grow, due to the properties owned plastics, among others, can not rot, do not decompose naturally, it can not absorb water, and can not rust, and eventually ended up being a problem for the environment. (YBP, 1986).
Utilization of waste plastics is an effort to suppress plastic waste to a minimum and within certain limits save resources and reduce dependence on imported raw materials. Utilization of waste plastics can be done with reuse (reuse) and recycling (recycle). In Indonesia, the use of plastic waste in the scale of general household usage is back with different purposes, for example, place a plastic paint used for pot or bucket. Reuse ugly side, particularly in the form of packaging is often used for product counterfeiting as it often happens in the big cities (Syafitrie, 2001).
Utilization of waste plastics for recycling is generally done by the industry. Generally, there are four requirements for a plastic waste can be processed by an industry, among others, certain wastes must be in the form as needed (seed, pellets, powder, pieces), the waste must be homogeneous, uncontaminated, and sought not oxidized. To overcome these problems, before use of plastic waste is processed through a simple step, the separation, cutting, washing, and removal of substances such as iron, and so on (Sasse et al., 1995).
There are things that benefit in the use of plastic waste in Indonesia compared to developed countries. This is possible because manual separation is considered not possible in developed countries, can be done in Indonesia, which has abundant labor so that the separation does not need to be done with advanced equipment that require high costs. These conditions allow the development of plastics recycling industry in Indonesia (Syafitrie, 2001).
Use of recycled plastic in the manufacture of plastic goods back has been growing rapidly. Almost all types of plastic waste (80%) can be processed back into the original item must be done despite mixing with new raw materials and additives to improve the quality (Syafitrie, 2001). According to Hartono (1998) four types of plastic waste are popular and sell well in the market, namely polyethylene (PE), High Density Polyethylene (HDPE), polypropylene (PP), and asoi.
UTILIZATION OF WASTE WOOD AND POWDER WOOD PLASTIC COMPOSITES AS PLASTIC RECYCLING 

Composite wood is a term used to describe any product that is made from sheets or small pieces of wood glued together (Maloney, 1996). Referring to the definition above, composite wood powder composite plastic is made of plastic as a matrix and wood powder as filler (filler), which has properties of both. The addition of filler into the matrix aims to reduce density, increase stiffness and reduce the cost per unit volume. In terms of wood, with the polymer matrix inside the strength and physical properties will also increase (Febrianto, 1999).
Composite manufacturing using a matrix of plastic that has been recycled, in addition to improving the efficiency of wood utilization, can also reduce the load on plastic waste in addition to producing innovative products as a substitute for wood building materials. The advantages of this product include: cheaper production costs, abundant raw materials, flexible in the manufacturing process, low density, it is biodegradable (rather than plastic), possesses properties better than the original raw material, can be applied for various purposes, as well as can be recycled (recycleable). Some examples of the use of this product are as interior parts of vehicles (cars, trains, airplanes), furniture, or building components (windows, doors, walls, floors and bridges) (Febrianto, 1999: Youngquist, 1995).
Wood powder as Filler
Filler is added to the matrix in order to improve the mechanical properties of plastics through the deployment of effective stress between the fiber and the matrix (Han, 1990). Besides the addition of filler to reduce costs as well as improve some properties of its products.
Inorganic materials such as calcium carbonate, talc, mica, and fiberglass is the material most commonly used as a filler in the plastics industry. The addition of calcium carbonate, mica and talc may increase the strength of the plastic, but the weight of the product is also increased so that the transportation costs would be higher. In addition, calcium carbonate and talc are abrasive to equipment used, thereby shortening the service life. The addition of fiberglass to increase the strength of the product but the price is very expensive. Therefore the use of organic materials, such as wood filler in the plastics industry began to receive attention. In Indonesia, the potential for very large timber as a filler, especially the utilization of waste sawdust is still not optimal.
According Strak and Berger (1997), sawdust has advantages as a filler when compared to filler minerals such as mica, calcium carbonate, and talc are: process temperature is lower (less than 400 º F) thereby reducing energy costs, can be degraded naturally, weight species are much lower, so the cheaper the cost per volume, low geseknya style so not to damage equipment on the manufacturing process, and comes from renewable sources
Some factors to consider in the use of sawdust as a filler in the manufacture of wood plastic composite is a type of wood, the size ratio between powder and sawdust and plastic. Another thing to consider is the nature of wood dust itself. Wood is a material composed mostly of cellulose (40-50%), hemicellulose (20-30%), lignin (20-30%), and small amounts of inorganic materials and extractive. Therefore hydrophilic wood, rigid, and can be biologically degraded. The properties of the wood causes less suitable when combined with plastic, because it is in the manufacture of wood-plastic composites required assistance coupling agent (Febrianto, 1999).
Plastic Recycling In The Matrix
In Indonesia, most of the recycled plastic used again as the original product with lower quality. Use of recycled plastic as a construction material is still very rare. In the 1980s, the UK and Italy have been recycled plastic used to make telephone poles instead of wooden poles or iron. In Sweden recycled plastic used to manufacture the plastic brick multistory buildings, because lighter and more powerful than common brick (YBP, 1986).
Use of recycled plastic in the field of composite wood in Indonesia is still limited at the research stage. There are two strategies in the manufacture of wood composites by using plastic, plastic first used as a binder, while the wood as the main component, the second used wood filler / filler and a plastic matrix. Research on the use of recycled polypropylene plastic as a substitute for thermoset adhesives in the manufacture of particle board made by Febrianto et al (2001). Particle board product produced has dimensional stability and high mechanical strength compared to conventional particle boards. Research recycled plastic as wood plastic composite matrix made Setyawati (2003) and Sulaeman (2003) by using recycled polypropylene plastic. In the manufacture of wood plastic composite recycling, some thermoplastic polymers can be used as a matrix, but is limited by low temperature decomposition beginning and heating wood (approximately 200 ° C).
Making Process
Basically composite manufacturing recycled plastic wood powder not unlike the plastic matrix composites with pure. These composites can be made through the process one stage, two-stage process, and the continuous process. At one stage of the process, all the raw materials mixed first manually and then entered into the tool pengadon (kneader) and processed to produce a composite product. In the two-stage process of modified plastic raw materials first, then filler mixed together in the kneader and formed into a composite. The combination of these stages is known as a continuous process. In this process the raw materials incorporated gradually and sequentially in a kneader and then processed through a composite product (Han and Shiraishi, 1990). Generally a two-stage process produces a better product than the one stage, but the process takes one step shorter.
Diagram of basic manufacturing process is presented in Figure 1.
Preparation of filler 

In principle the preparation of filler intended to get sawdust or wood flour size and uniform moisture content. The more fine powders greater the contact surface between the matriknya filler, so the products become more homogeneous. However, if the terms of decorative composite powder size larger will produce a better appearance because the distribution of the powder timber provides its own value.
Preparation of Recycled Plastic
Waste plastics are grouped according to the type of plastic (polypropylene (PP), polyethylene (PE), and so on). Once cleaned, the waste is chopped to reduce the size, then heated to its melting point, then processed to form a pellet. Before being used as a composite matrix made analysts differential thermal (DTA). In the two-stage process, the pellets diblending first by serving as a coupling agent in the manufacture of composite compatibilizer.
Blending (Pengadonan)
The stages in this pengadonan adapted to the process used, one stage, two-stage, or continuous. According to Han (1990) pengadonan conditions are most influential in the manufacture of composites is the temperature, rotation rate, and time pengadonan.
The formation of composite
After the mixing is complete, the sample is directly incurred to molded into sheets with heat presses. Compression performed for 2.5 – 3 minutes with a pressure of 100 kgf/cm2 for 30 seconds at a temperature of 170 º C – 190 º C. After cold compression at the same pressure for 30 seconds, the sheet is then cooled at room temperature.
Testing of Composites
Composite testing conducted to determine whether the product meets the requirements specified for a particular use. Type adapted to the needs of testing, testing fterhadap generally includes physical properties, mechanical, and thermal composites.
Composite of high quality can only be achieved if the sawdust is well distributed in the matrix. In fact, the affinity of wood with a plastic powder is very low because the wood is hydrophilic, while the plastic is hydrophobic. As a result, the composite is formed has a drainage properties and low moldability and in turn can reduce the strength of materials (Han, 1990).
The results of research
Studies that have been and are being conducted aiming to produce wood plastic composite with the best properties. Han (1990), Stark and Berger (1997), and Oksman and Clemons (1997), examines the factors that play an important role in the manufacture of wood plastic composite powder, the type and form of raw material, wood species, the ratio of filler to the matrix, type and compatibilizer levels, as well as the conditions at the time of pengadonan. The results show that to some extent an increase in strength of the composite with the smaller size of the powder used, as well as the type, ratio of sawdust and plastic, as well as the type of wood moisture content significantly affect the properties of the resulting composites. The addition of compatibilizer to a certain extent affect both the strength of the composite.
Research on wood plastic composite mostly still use plastic purely as a matrix. Research using recycled matrix, performed by Setyawati (2003), Sulaeman (2003) by using recycled polypropylene. The results of the study are summarized as follows:
Setyawati (2003) examined the effect of the size ratio of sawdust to the matrix and compatibilizer content on physical and mechanical properties of polypropylene wood composite recycling. The results showed a similar pattern with a composite that uses pure polypropylene, the properties of the composites increased with increasing particle size and smoothness. Sawdust ratio of 50:50 with a matrix with the addition of 2.5% MAH as compatibilizer is accompanied by the addition of initiator produces optimal composite force, as well as physical properties sufficient.
Sulaeman (2003), examined the deterioration of wood plastic composite recycled polypropylene by weather and termites. The results showed a composite of recycled plastic lumber can be degraded by weather, but resistant to termite attack.
Research The Moderate / Will Do
Research and testing of wood plastic composite so far has been in the form of thin sheets, so the test is still based on testing plastics. Currently Sutrisno (personal communication) is conducting research on the properties of recycled wood plastic composite in the form of small clear specimen so testing is directed to the possible use of composites instead of wood.
Future studies will lead to the determination of the wood plastic composite board manufacturing the best and the quality of composite board with pre-treatment on the filler, the selection of modifier / compatibilizer, the initiator, the determination of process variables, and the use of materials other than wood berlignoselulosa (research plan) .

CLOSING

Manufacture of composite products sawdust and recycled plastic is one alternative to the use of waste wood and plastic, in order to improve the efficiency of wood utilization, reducing the environmental load of the plastic waste and to produce innovative products as a substitute for wood building materials. The development of these products in the future will hopefully have a positive impact, not only limited to industrial development and foreign exchange savings, but also improve the quality of the environment.